Automatische clipmachine die darmen en verpakkingen met een dubbele clip afsluit. Geschikt voor slagerijen, worstmakerijen en uitsnijderijen; capaciteit aanpasbaar aan uw behoeften, prijsopgave op aanvraag.
Dual-clip Automatic Clipping Machine from HENCO is built for sausage clipping and filling in commercial food processing plants. It is normally specified together with equipment such as dual-tube hydraulic sausage filler to complete that step on the line, within a Sausage Processing Machine workflow. Buyers comparing options such as automatic sausage clipping machine or sausage clipper machine can use this page as the starting point: share your raw material, target output and line layout, and HENCO engineers will confirm the configuration that suits your production before you request a quote.
The Dual-Clip Automatic Clipping Machine is automatic sausage clipping equipment for dual-clip clipping application in sausage processing. It is an integrated sausage filling and clipping machine, presented with labeled structure diagrams, performance displays and application product showcases. White-background full-machine views, trial operation scenes and production/shipping scene photos are prepared, together with parameter configuration and product process documents.
Different configurations are listed separately; please confirm the required configuration before quotation.
| Model / Configuration | Parameters |
|---|---|
| XZ-I configuration |
|
| XZ-II Aluminum-Wire Dual-Clip Automatic Clipping Machine |
|
| Pneumatic twist configuration |
|
| Integrated filling and clipping configuration |
|
| Integrated clipping configuration |
|
Please confirm the final configuration, unit and power requirements before quotation.
Short demonstration videos showing this machine in operation. Videos are illustrative material; actual performance depends on configuration and operating conditions.
Illustrative project profile — not a customer case.
Profile: Sausage filling, tying or clipping line — illustrative planning example.
Production context: a sausage producer preparing linked, clipped or filled sausage products.
Typical challenge: manual filling, tying or clipping can make sealing, spacing and line pacing vary between operators.
Equipment role: this product supports the filling, tying or clipping step described by its product title; configuration, casing and utilities to be confirmed.
Integration points: filler, tying/clipping, conveying and downstream cooking/smoking/packing where applicable; confirm during line review.
Planning checklist: raw material, target product, desired throughput, utilities, layout and sanitation requirements to be confirmed before quotation.
Share your product, target output and line layout with HENCO for a configuration review.
Illustrative project profile — not a customer case.
Watch real operation and application examples:
This section records what is verified for this product: documented specifications, the process fit, the supporting resources, the related equipment and how to request a configuration. Items the documentation does not confirm are marked Confirm for your configuration. No figures for price, stock or certificate scope have been added, and no customer installation is claimed unless a public record exists.
Each documented configuration is listed separately because the source documents describe several clipping machine variants under this product. Where a source entry carries no unit, that is stated rather than assumed.
| Parameter | Documented value / status |
|---|---|
| XZ-I configuration | Capacity 100–500 kg/h; rated power 0.1 kW; dimensions 700 x 800 x 1600 mm; voltage 220 V; net weight 150 kg |
| XZ-II aluminium-wire dual-clip automatic clipping machine | Capacity 24–30 pieces/min; rated power 0.1 kW; dimensions 1050 x 550 x 1700 mm; voltage 220 V; net weight 270 kg |
| Pneumatic twist configuration | Capacity 100 kg/h; rated power 20 kW; dimensions 500 x 400 x 1300 mm; air pressure 20; casing inner diameter 60; hopper 60; voltage 380 V; net weight 220 kg |
| Integrated filling and clipping configuration | Capacity 200 kg/h; rated power 40 kW; dimensions 500 x 400 x 1300 mm; air pressure 40; casing inner diameter 80; hopper 100; voltage 380 V; net weight 220 kg |
| Integrated clipping configuration | Capacity 30–50 cycles/min; rated power 0.5 kW; dimensions 640 x 640 x 1430 mm; air pressure greater than 0.7 MPa; casing inner diameter 15 / 20 / 25 / 33 mm; hopper 30 L; voltage 220 V; net weight 130 kg |
| Units of several source entries | Confirm for your configuration — the source parameter documents do not state the unit for several air-pressure, hopper and capacity entries |
| Documented machine role | Integrated sausage filling and clipping machine; labeled structure diagrams, performance displays and application product showcases are provided in the product material |
| Clip material and clip size | Confirm for your configuration |
Source: the parameter-configuration documents and the production-process document already linked on this page (listed again under Evidence and Supporting Resources). Specification values above are transcribed from the HENCO source documents listed under Evidence and Supporting Resources for the model(s) named in this table. Values that the source documents do not confirm are marked <em>Confirm for your configuration</em>. Nothing has been added for price, stock, certificate scope, capacity or authority approvals.
Derived only from the documented parameter and process files for this machine and the published HENCO category. No customer installation or delivery for this machine is published on this page. The production and shipping scene photos on this page show this equipment being prepared for dispatch; they are not presented here as a named customer case.
The product documents, videos and company-level references below are all HENCO-owned resources that are live today.
The videos above show this equipment running. They are demonstration material and are not presented as a verified customer installation case.
Selecting a dual-clip automatic clipping machine comes down to the casing and clip format, the filling step it is paired with and the downstream cooking, smoking or packing stages. This page documents dual-clip clipping and filling on one machine, plus the model rows listed in the Verified Product Specifications table.
Real HENCO product or category pages for the adjacent stages. Process path: mixing → filling → clipping (this machine) or tying → cooking / smoking → chilling → packing.
To prepare a configuration and quotation, please send: raw material (type and condition), target output (kg/h or pieces/h), desired cut or product form and dimensions, line layout / available floor space, destination country and port, and whether OEM/ODM branding is required. For a clipping machine, also state the casing calibre and type, the clip material and size you use, the sections per minute you need, and whether filling and clipping must be integrated on one machine.
The existing enquiry routes on this page are unchanged: email Henco699@gmail.com, phone/WhatsApp +86 158 6379 8970, the Request Quote button, and the on-page enquiry form. No form field or template has been modified.